RAYKUBE Wireless Electronic Lock Keyless With Remote Control Keys Smart Invisible Remotly Door Lock For Home Anti-theft Security
＞No Wired, Easy Installtion
＞Wireless Controller Opened/Locked
＞After Close The Door Will Locked Automatic
＞Inside Unblocking Button For Emergencies
＞Solid And Durable Body
＞Indoor Use Only
＞Dry Battery Power Supply
＞Low Power Warning
＞Easy installation on all kind of door: wood, glass, metal, etc.
R-RM5 Remote Control:
＞Easy operation through clear division of opening / closing.
＞Audible alarm to verify each opening / closing.
＞Register of a maximum of 16 remote controls in each lock.
＞Link an unlimited number of locks with each remote control.
＞Anticopy encryption system with rolling code.
＞Operation distance: within 5 m (according to the characteristics of the installation).
1 x R-W50 Electric Lock
4 x Remote Control
1 x Screw Kit
② Emergency unlock button
To quickly unlock and escape in emergency situation.
1）It is forbidden to use non-emergency situation.
2）Once use the emergency unlock button, the automatic locking function will be closed. Only receives the decoding command on the remote control, automatic locking function can open again.
③ Unlock button indoor
When use is indoor, can use it open the lock.
⑤The match code button
Add or delete the remote control.
⑥ Open button
┻ ON Open position function.
┻ OFF Press the button to close the lock function
If it don’t automatically locked ,the remote control will lose efficacy.
⑧Automatically closed magnet switch
1）Automatically closed the lock after control the main lock and lock hasp in place, and the main lock in standby state.
2）When the main lock and the lock hasp is separate, the main lock will in standby state, then the lock is in the best way to save electricity .
⑨ Install hole of the main lock and the lock hasp
Install hole of the main lock：5 — 4*25 self-taped
Install hole of the lock has：4 — 4*25 self-taped
⑩ (Back) When install the lock, please use the 3M glue Before use the 3M glue to install the lock, please make sure the install way is smooth and clean
Alarm for change battery：
2. If the low battery condition is continue, the lock will flicker and the buzzer will alarm, and it will automatically cut off the lock function.
3. When the battery is lower than the minimum power set by the lock, the remote lock will automatic open. This function is avoid user go out for a long time and after the change battery function alarm but it still can’t be changed. It can impede user can’t open the door when the battery with no power completely.
4. In order to avoid the automatic lock which reduces the safety of the lock, please replace the battery when user will go out for a long time.
The way to change the battery for the main:
2. According to the direction of the arrow to open the battery cover,put 2 AAM battery in it (Please insert the new battery after 10 seconds to protect the electronic circuit).
3. Then open and close the door to check if the new battery is good.
Change the battery in remote control ：
2. Use a small size tool inserts the flank and rotates the tool to open the cover, the battery is CRC2032, and pay attention to the polarity of the battery. The install order: the front cover, rubber blanket, the electronics circuit board and the back cover.
3. After change the battery, please check whether remote control can work.
The way to match code with the fingerprint terminal, the remote control, the exit button and the lock:
7. Finish match code, please check the fingerprint terminal and remote control.
8.When one of the controller can’t work , please according to the above step to rematch code again.
The way to rematch code between the remote control and the lock:
2. After rematch code, all the lost controllers are useless.