Imager sensor: XM510 FOR 720P/960P HI3518E+2035 15fps FOR 1080P
lens: HD Megapixel professional 3.6mm lens for 720P/ 2MP 1080PLens for 1.3MP
Video compression: H.264 Highprofile
Bite rate: 32Kbps~8Mbps
Image resolution:1280X720(1.0Megapixel)/1280X960 ( 1.3 Megapixel ) /1920X1080 (2.0 Megapixel )
Frame rate: 50Hz:25fps 60Hz: 30fps For 720P/22fps for 960P / 15fps For 1080P
Image setting:”Saturation,brightness and constrast are adjustable through IE or client”
Storage: Network storage
Intelligent alarm : Motion detection, video loss,cable break
Net interface: 1*RJ45 10M/100M TCP/IP HTTP RTSP/FTP/PPPOE/DHCP/DDNS/NTP/UPnP
Working condition: minus -10~60 degree, humidity lenss than 90%
Power: DC 12V 1-2A
Led :24pcs IR LED with 20m IR distance
1 * Camera
1 * CD
Power supply not included ( click below link to check the power supply which is compatible with this ip camera )
Q:What’s the default ip address of the camera ?
F: 192.168.1.10 Username : admin Password : null ( empty ) !
Q: Does the camera supports Motion Detect,FTP,Email alarm, RTSP and so on ?
F: Yes ! All the IP Cameras we are selling supports these functions .
1) Please Setup the motion detection in the CMS software .
2) We suggest the Sever-U and FileZilla FTP Server to upload the video or image.
3) For the Email alarm,please use Email server which supports SMTP ( Hotmail ,Yahoo not support SMTP ,it not supports Gmail temperately since the server problem ) .
4) ,RTSP URL for VLC media Player :
Example : rtsp://10.6.10.25:554/user=admin&password=&channel=1&stream=0.sdp?real_stream
F: What’re the ports information of the cameras ?
Q : ONVIF 2.0 Port 8899 ;RTSP Port 554 ;HTTP Port 80;Media Port 34567
F:Does the camera support IE ,Chrome ,Firefox and so on ?
Q: Since the plug-in problem ,for website interface IP address URL,ONLY IE supports Multi Language . Chrome,Safari just support Chinese .
For cloud server XMEYE.NET ,it supports multi language
Q:When I finish the steps to add the camera to the CMS list,why it notify “ Can’t find the Device “ even I can see the default ip address 192.168.1.10 in the menu .
F: It is the IP Address conflict ,the default ip address is not in the same network segment as your router.
Please click “Edit Device “ to change the camera’s ip address to make them in the same network segment !
For example ,if your router’s ip address is 192.168.0.1 ,then you need to change the camera’s ip address to 192.168.0.XX .